SOYO SY-K7VMP User Manual download pdf (Page 13)

SY-K7VMP

Quick Start Guide

Installation

“FOC” includes the following functions:

Simultaneous Signal Follow Up

Before the system enters the O/S, H/W will detect the

signals of the CPU fan pins, get their revolution information and send it to the BIOS.

Auto Power Off System: If the BIOS receives the information of CPU fan revolution, it

continues to function normally. If no signal is received, it will inform the system and

disconnect the power supply immediately to protect the CPU from overheating.

Note

: The following must be observed to secure the normal functioning of “Fan-Off

Control”:

1. FOC only works on CPUFAN 1.

2. A CPU fan with sensor pin must be used.

3. CPU fans approved by AMD are strongly recommended.

The “HOT KEY” function is provided for the CPU fans without sensor pins, to avoid the power off.

Users may press the “Insert” key to jump over the “Power Off” mode; go to the BIOS and disable

“FOC”. Now system can be booted normally.

We provide the following User-Friendly protection features:

1. Fan-Off Control: The motherboard detects the status of the CPU fan and protects the

CPU by automatically disconnecting the power supply. The default value of this function

is Enable. After booting up, the user may disable it.

2. Heat Dissipation Paste: Heat Dissipation Paste is included for all Socket-A

motherboards, to enhance the heat dissipation capability.

Furthermore, we strongly recommend our users to enable the function of H/W monitoring in the BIOS.

This function, together with the FOC, provides the total protection to the CPU and allows it to maximize

its performance.

Note: FOC will only work during BOOT-up. Once the system enters the operating system, FOC will be

disabled.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 33 34

No comments

SOYO SY-K7VMP User Manual Page 13